Thin Oil Maintenance Free Vibrating Screen

The vibrating screen can be used for screening coarse materials after coarse crushing, as well as for material diversion screening and grading screening as the final product. Suitable for screening operations in various working conditions such as ultra heavy, heavy, medium, and coarse/fine screening, and can be equipped with a spray system. There are one layer, two layer, three layer, and four layer sun drying options available. It can be equipped with various types of mesh screens such as wire weaving, polyurethane, steel plate punching, etc. It is a highly versatile series that can be widely used in screening operations in various industries.

Working principle:

The motion of the vibrating screen is driven by a motor through a soft connection to an eccentric mass exciter, causing the screen bed to undergo periodic asymmetric reciprocating mechanical vibration. Loosen the material layer on the screen surface and throw it away from the screen surface, allowing fine materials to fall through the material layer and separate through the sieve holes. Screen out the materials stuck in the sieve holes, and move the fine materials downwards to be discharged through the sieve.

Product features:

1. Advanced exciter assembly: Through user use and comparison, this exciter meter has improved screening efficiency by 20% -30% compared to ordinary exciters

2. The most advanced and stable oil lubrication system: The vibrating screen oil lubrication system technology is safe and mature. The oil lubrication system has the advantages of better cooling performance, easy cleaning, low resistance in producing oil film, and low cost compared to butter lubrication. The vibrating screen with oil lubrication system is twice as durable as the vibrating screen with butter lubrication system.

3. Adopting the ring groove cold riveting structure technology: To prevent the vibration screen from being deformed due to the loosening of the frame caused by long-term operation, resulting in irreparable consequences.

4. The bearing seat is made of special steel: wear-resistant and not easily deformed. One important reason for the poor durability of bearings and frequent replacement of bearings is the wear and tear of the bearing seat, which causes the inner diameter to rotate.

5. Adjustable amplitude and tilt angle: can adapt to the screening of various materials.

Technical parameters: